Production Speed:

• 1-40 loads per hour
• NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

Load Capacity:

• Maximum load weight: 4,000# dynamic " 12,000# static
• Maximum load size: 48" W x 48" L (68" max. load
• diagonal) x 80" H (plus up to 4" top overlap)
• Minimum load size: 30" W x 30" L x 24" H

Turntable:

• 72" diameter 3/8" thick laser-cut steel plate with 5" skirt
• Front and side cut-outs with UHMW flexible contouring for fork truck access
• 6-point heavy duty ball bearing caster support system
• ANSI # 60 direct chain drive c/w chain tensioner
• 3-16 RPM rotational speed c/w soft start acceleration
• 3/4 HP DC variable speed motor c/w turntable holding brake
• Final revolution deceleration and positive stop alignment

Film Carriage Elevator:

• 1/2 HP DC variable speed motor
• ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
• Maintenance free 12 point carriage guidance system

Film Delivery System:

• Super Rapid Thread™ 20" capacity pre-stretch carriage
• with Patent Pending pressure balanced nip roller system
• 1/2 HP DC variable speed motor
• Fully electronic dynamic dancer corner compensation
• 33 to 313% fixed stretch capability
• Pre-stretch ratio variable by easy sprocket change
• Rapid Thread™ Safety Door with auto power cut-off switch
• Carriage Descent Obstruction Safety Shut-Off Device
• Side mounted film carriage for operator convenience and safety

Powered Roller Conveyor:

• Basic system includes: 72" dia. powered Process / Turntable section & 5 ft. Gravity Outfeed section
• Turntable section includes:
• Chain driven live roller type conveyor
• Rated 4,000# per section
• 2-1/2" diameter 11 gauge rollers c/w 11/16" hex axles on 3" centers
• ANSI # 40 roller to roller chain drive
• 50" effective roller width
• Conveyor speed variable up to 30 FPM with electronic soft start
• Pass-line height " 16-1/2" from floor to top of rollers
• 1/2 HP DC variable speed motor

Control Features:

• PANASONIC PLC with Touchscreen Operator Interface
• Power Off " On " Reset switch & Power On Indicator light
• Cycle Pause for applying top sheets
• Reinforce Wrap control for mid-wrapping
• Emergency Stop button
• Turntable Jog button
• Film Carriage Lower & Raise buttons
• Film Clamp Open/Close button
• Eject Load (Turntable Conveyor Jog) button
• Film Tension (Force-to-Load) Control
• Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
• Separate film carriage raise & lower speed controls
• Variable turntable speed control
• Triple beam auto load height sensing photo-eye, detects dark or shiny loads
• Separate 1 to 12 revolution top & bottom wrap control
• Gravity conveyor full photo-eye
• Broken film/out of film detection c/w automatic machine reset
• Stack-light beacon indicates run, clear or fault conditions
• Pendant Start/Stop push-button station for remote
• operator control " optional lanyard or wireless remote
• control available
• NEMA 12 control panel enclosure
• Non-proprietary UL/CSA approved components

Automation Features:

• "All Electric " No Pneumatics Required"
• Electro-mechanically actuated film clamp mechanism
• Electro-mechanically actuated film tail cut/wipe arm
• mechanism
• Ni-chrome impulse hot wire film cut off c/w automatic
• periodic cleaning cycle

Structural Features:

• All structural steel construction
• Forklift truck portable base structure design " lifting tubes
• included for front and rear access
• Fully guarded structural steel H-beam machine tower
• Electro-static powder coated paint finish

Electrical Requirement:

• 115 Volts 1 Phase 60 Hz 20 Amps